Your system has two hard disks.You want to increase disk access speed for your web ser

Your network has Network Access Protection (NAP) deployed. The network contains two servers named Server1 and Server2. Server1 is a Network Policy Server (NPS). Server2 has a third-party antivirus solution installed.Server1 is configured to use a custom system health validator provided by the antivirus vendor. The system health validator uses Server2 to identify the version of the current antivirus definition.You need to ensure that NAP clients are considered noncompliant if Server1 cannot connect to Server2.Which error code resolution setting should you configure？（）

A. SHA not responding to NAP client

B. SHA unable to contact required services

C. SHV not responding

D. SHV unable to contact required services

Placing sensors correctly throughout your network is crucial to successfully implementing your Cisco intrusion detection system .Which two of these are characteristics of an IDS sensor？（）

A. has a permissive interface that is used to monitor networks

B. is an active device in the traffic path

C. passively listens to network traffic

D. has a promiscuous interface that is used to monitor the network

notices that the Host Checker policies are not being applied and enforced. You have verified that the controllers configuration is correct.Which two conditions are causing this issue？（）

A. The endpoint is using EAP-PEAP with EAP-GTC as the inner protocol,

B. The endpoint is using EAP-TTLS with EAP-JUAC as the inner protocol.

C. The endpoint is using EAP-FAST with EAP-GTC as the inner protocol,

D. The endpoint is using EAP-PEAP with EAP-JUAC as the inner protocol.

ervices server role is installed on SRV1. The company wants to centralize printing on SRV1 for both UNIX and Windows users. You need to provide support to the UNIX users who print on SRV1.What are two possible ways to achieve this goal？ （）

A. Install the Internet Printing role service on SRV1.

B. Install the Line Printer Daemon (LPD) Services role service on SRV1.

C. Configure the printers on SRV1 to use Line Printer Remote printing.

D. Install the File Services server role on SRV1 and activate the Services for Network File System role service.

rive D. Windows 2000 Server is installed on Drive D. Both partitions are formatted as NTFS. Your office experiences a power failure that causes your Windows 2000 Server computer to restart.

When the computer is restarting, you receive the following error message "NTLDR is missing. Press any key to restart".

What should you do？

A．Start the computer by using Windows 2000 Server computer CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system partition.

B．Start the computer in debugging mode. Copy the NTLDR file on the CD-ROM to the root of the system partition.

C．Start the computer by using the Windows 2000 bootable floppy disk. From a command prompt, run the sfc/scanboot command.

D．Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.

e Pack 2 (SP2).Server1 has the following hardware configurations:·A single processor that supports hyper-threading·Dual processor motherboard·Two hard disks·2 GB of RAMThe first disk contains all the files for the operating system and applications. The second disk is empty.Hyper-threading is disabled in the BIOS.Users report a slow response when they query the database on Server1.You monitor Server1 for one day and receive the performance statistics shown in the following table.You need to improve database performance.What should you do？ （）

A. Upgrade the RAM to 4 gb.

B. Install a second processor.

C. Enable hyper-threading in the bios.

D. Move the database to the second disk.

TestKing4. TestKing4 has a single physical disk that is configured as a simple volume.You plan to store the files for a large database on TestKing4. You plan to install additional physical disks on TestKing4.You need to reconfigure the disks on TestKing4. Your solution must provide fault tolerance for the operating system and the database files.Which two actions should you perform？（） (Each correct answer presents part of the solution. Choose two.)

A. Install three additional physical disks. Create a new RAID-5 volume. Place the database files on the new volume.

B. Install three additional physical disks. Create a new striped volume. Place the database files on the new volume.

C. Install one additional physical disk. Configure the simple volume as a mirrored volume.

D. Install one additional physical disk. Configure the simple volume as a spanned volume.

h as the following: 1.Customer service is a core function in the logistics process.Each business entity should have a customer service department to handle complaints,special orders,loss and damage claims,returns,bills problem,and etc.This function becomes crucial because any dissatisfaction can lead to failure to retain customers. 2.Inventory management is to maintain the stock of raw materials and half-finished products.In order to satisfy the customers'demand and minimize costs,a company should establish an optimal level of inventory to meet the market demand that exceeds our expecta-tions,and at the same time,minimize your inventory holding costs and inventory write-down costs. 3.Transportation has taken a great role in many logistics systems for two reasons.First of all,globalization and importing-exporting activities make most products necessary to be transferred from one country to another.Secondly,information revolution has propelled the manufacturing process and consumer behaviors to be changed drastically.Traditional trans-portation methods need to be upgraded to accommodate modern transportation demand,therefore,containerization and usage of information sharing system emerge. 4.Storage is needed to manage the materials and store ready-for-market products in warehouses.There is new technology applied in the storage,for example,automatic ware-house.Old-fashioned warehouse has become the distribution center where container trucks deliver and pick up the goods. 5.Information system links all logistics processes and integrates all information to en-sure all the handling of large quantity of goods are delivered in an efficient,cost-effective and accurate manner. Questions:

Why does information system contribute to an efficient logistics system？()

A.To link and integrate all logistics functions.

B.To gather new information.

C.To eliminate wrong data.

D.To make all data public for future use.

Subject:Reorganisation

Date:12.11.2005

From:Simon Harris

To:Brett

Cc:

Dear Brett,

Welcome back to St.Swithen’s.I look forward to hearing about your adventures in the US.

I’m writing because there have been a lot of changes since you went away, and you need to know about them before you can start work.

The main change is that we have had a new computer system installed.You will need to be trained in using the system before you can see any patients! I’ve arranged for you to have a training session at 10 o’clock on Monday with our IT consultant, Gerry.He’s a really nice guy.

It’s especially important that you can use the patient records system.We’ve had a few teething problems, and it seems complicated at first;but when you get used to it, you’ll find it really helpful.For example, it’s much quicker than the old system.Remember you used to wait ages before the information came up on the screen？ Well, now it’s very quick.

You will also need to be familiar with the appointment booking system, so you can see who your next patient is.The new program makes it impossible to double-book a patient, so we shouldn’t get as many complaints as we used to.

As well as the computer system, we’ve also installed a new electronic security door.You will need a special card from reception and it will need replacing every two months.I’m afraid we made Bill redundant.It’s a shame;I used to enjoy talking to him every morning.

Well, I hope you like the improvements.Most people find that it makes their work easier and faster.There is one downside though;the atmosphere has become less personal.I used to talk to everyone a lot, but now we communicate by email most of the time.I even email people who work in the same room as me!

Well, see you on Monday, Brett.Nice to have you back.

Best wishes,

Simon

1.Brett has just come back from ().

A.Europe

B.England

C.America

D.China

2.Brett will ()on Monday morning.

A.see his next patient

B.have a training session

C.get a special card form. the reception

D.talk to Bill in the morning

3.The main change that has happened since Brett went away is that ().

A.the company has had a new computer system installed

B.the company has installed a new electronic security door

C.the company has imported many new computers

D.the company has dismissed many old staff

4.The new patient records system is better than the old one because().

A.it’s much quicker than the old one

B.you should wait for ages before the information came up on the screen

C.you need not to be familiar with the appointment booking system

D.people need not talk to each other face to face any more

5.The main disadvantage of the new computer system is that ().

A.you need to be very familiar with the booking system

B.the card from the reception will need replacing every months

C.it’s impossible to double-book a patient

D.the atmosphere has become less personal

Part A

Directions: Read the following three texts. Answer the questions on each text by choosing A, B, C or D. Mark your answers on ANSWER SHEET 1.

The United States Congress is a bicameral legislature. Two Houses-Senate and House of Representatives make the laws. Before a bill may be sent to the President to sign, both houses must approve. When great agreement exists on a bill, the law moves quickly. However, most suggested laws are complex and relate to interests and conflicts which need debate and careful consideration.

Both houses of Congress use the committee system to handle the numerous bills. A bill is referred to the committee responsible for that category -- whether taxation, foreign affairs, housing or whatever. In the committee the bill is studied, arguments are collected for and against, and advice is gathered from experts on the subject. Citizens have the chance to influence legislation through the committee system. If the committee votes favorably, the bill goes before the entire house. Usually, committee approval means favorable action by the Senate and House of Representatives.

As a result, membership on the more important committees is eagerly sought. How long a senator or representative has served in Congress is most important in assigning committee memberships. Usually the majority political party receives a majority of the memberships of each committee. In this way the party controls decisions because the real work and power of Congress lies in the system of committees. Some people protest that this system restricts laws, but most see this as the system that works best.

By using the context and word part clues, we may conclude that "bicameral" means _______.

A．Republicans and Democrats

B．two Houses

C．congressional system

D．law making procedure