Which command on router EzonexamA will assign the last usable IP address from the 192.168.

A. On the ABR router ospf 10 area 3 stub

B. On all Area 3 routers router ospf 10 area 3 stub

C. On all Area 3 routers router ospf 10 area 3 stub no - summary

D. On the ABR router ospf 10 area 3 nssa

E. On the ABR rou ter ospf 10 area 3 stub no - summary

.0.255, with no other current EIGRP configuration. R1‘s (working) Fa0/0 interface has been configured with IP address 172.16.2.2/26. R1 has found three EIGRP neighbors reachable via interface Fa0/0, including the rou ter with IP address 172.16.2.20. When the engineer attempts to add the neighbor 172.16.2.20 fa0/0 command in EIGRP configuration mode.Which of the following occurs？（）

A.Fa0/0 fails

B.The command is rejecteD

C.The existing three neighbors fail

D.The neighborship with 172.16.2.20 fails and then reestablishes

E.None of the other answers is correct

us two ABRs, ABR1, and ABR2, all in area 100. The branches connect to the ABRs using Frame Relay point - to - point subinterfaces. The verification plan lists the output of the show i p ospf database summary 10.100.0.0 command on a router B1, one of the branches.Which of the following is true regarding the output that could be listed for this command？（）

A. The output lists nothing unless 10.100.0.0 has been configured as a summary rou te using the area range command.

B. If 10.100.0.0 is a subnet in area 0, the output lists one Type 3 LSA, specifically the LSA with the lower metric when comparing ABR1‘s and ABR2‘s LSA for 10.100.0.0.

C. If 10.100.0.0 is a subnet in area 0, the output lists two Type 3 LSAs, one each created by BR1 and ABR2.

D. None, because the Type 3 LSAs would exist only in the ABR‘s LSDBs.

ll the routes for this prefix have the same attributes.Which three path features would be reasons be for the rou ter to ignore some of the routes and not consider them as candidates for the best path？（）

A. paths from an internal BGP (iBGP) neighbor if the local autonomous system (AS) appears in the AS_PATH

B. paths for which the NEXT_HOP is inaccess ible

C. paths from an external BGP (eBGP) neighbor if the local autonomous system (AS) appears in the AS_PATH

D. paths for which the NEXT_HOP is accessible

E. paths that are marked as synchronized in the show ip bgp output

F. paths that are marked as not synchronized in the show ip bgp output

A. Router R1 will deny the 172.16.1.0/26 route while permitting the 172.16.1.64/27 route to be advertised.

B. Router R1 will advertise both rou tes.

C. Router R1 should be reconfigured with an ACL instead of an ip prefix - list command.

D. Router R1 will deny the 172.16.1.0/27 route while permitting the 172.16.1.0/26 route to be advertised.

ENT1 has an eBGP connection to an ISP router with address 3.3.3.3 and an iBGP connection to a router with address 4.4.4.4. Which of the following is most likely to be true？（）Network Next Hop Metric LocPrf Weight Path*＞ 3.3.3.3 0 0 1 1 1 1 218 i

A. The Enterprise likely uses ASN 1.

B. The neighboring ISP likely uses ASN 1.

C. The route has been advertised through ASN 1 multiple times.

D. Router Ent1 will add another ASN to the AS_Path before advertising this route to its iBGP peer (4.4.4.4).

A.SDRSI

B.SDRCI

C.SDCRI

A.debug icmp

B.debug ip icmp

C.debug tcp

D.debug packet

A.RLULC

B.RLLDC

C.RLLUC

A. show command

B. debug command

C. configuration command

D. rommon command

A.wlmrun

B.wlmstart

C.wlmcntrl

D.wlmstartup