题目
第1题
What will cause a Ezonexam router to enter setup mode? (Choose two)
A. The configuration file is missing in NVRAM.
B. The configuration register is set to 0x2100.
C. Boot system commands are misconfigured in the running-configuration.
D. The setup command was issued from the privileged mode prompt.
E. The IOS is missing.
F. The IOS is corrupt.
第3题
Which of the following desdription is WRONG .about Wi-Fi? ().
A.Any standard Wi~Fi device. will work anywhere in the world with global operative set of standaeds
B.Now most laptops are built with wireless network adapters inside
C.One can connect Wi-Fi devices in ad-hoc mode for client-to-client connections without a router
D.Communications between two devices need the involvement of an access point with Wi-Fi
第4题
下列网络设备中哪些能够隔离冲突域?()
A) Hub
B) Switch
C) Repeater
D) Router
第5题
(71) A. bridge
B. server
C. router
D. switch
第6题
试题三(15分)
阅读以下说明,回答问题1至问题5,将解答填入答题纸对应的解答栏内。
【说明】
某局域网拓扑结构如图3-1所示。
【问题1】 (2分)
若局域网所有主机的网卡状态均显示为则最可能的故障设备是(1)。
【问题2】 (5分,每空1分)
交换机Switch的配置模式包含用户模式、特权模式、全局配置模式和局部配置模式,请补充完成下面配置命令或注释。
Switch> ;(2)模式提示符
Switch >enable ; 进入(3)模式
Switch
Switch config terminal : 进入(4)模式
Switch(config)
Switch(confg)enable password cisco : 设置(5)
Switch(config)hostname C2950 ; 设置(6)
C2950(config)end
【问题3】 (3分,每空1分)
路由器Router的配置命令和注释如下,请补充完成。
Router>enable
Router config terminal
Router (confg)interface e0 ; 进入(7)模式
Router (config-if)ip address (8) 255.255.255.0 : 设置接口lP地址
Router (config-if) no shutdown ; (9)
Router (config-if)end
【问题4】(2分,每空1分)
如果PC3无法访问网段内的其他PC,查看其配置结果如图3-2所示,则PC3的配置项中(10)配置错误,可以将其更正为(11)。
【问题5】(3分,每空1分)
网络配置成功后,为了阻止PC2访问Internet,需要在图3-1中路由器EO接口上配置ACL规则,请补充完成。
Router(config)access-list 10 (12) 192.168.1.2 0.0.0.0
Router(config)access-list l0 permit (13)0.0,0.255
Router(config)access-list l0 deny any
Router(config)interface E0
Router(config-if)ip access-group (14) in
第8题
A.Rollover cable
B.Console cable
C.Crossover cable
D.Straight-through cable
E.Serial cable
第9题
A、集线器、网桥、交换机、路由器、网关
B、交换机、集线器、网桥、网关、路由器
C、集线器、交换机、网桥、网关、路由器
D、交换机、网桥、集线器、路由器、网关
为了保护您的账号安全,请在“赏学吧”公众号进行验证,点击“官网服务”-“账号验证”后输入验证码“”完成验证,验证成功后方可继续查看答案!