An inbound access list has been configured on a serial interface to deny packet entry for TCP and UDP ports 21, 23 and 25. What types of packets will be permitted by this ACL？ （）

A. as an outbound filter on interface fxp0

B. as an outbound filter on interface lo0

C. as an inbound filter on interface fxp0

D. as an inbound filter on interface lo0

A.FTP

B.Telnet

C.SMTP

D.DNS

E.HTTP

F.POP3

A.FTP

B.Telnet

C.SMTP

D.DNS

E.HTTP

F.POP3

A. Before they are routed to an outbound interface.

B. After they are routed for outbound traffic.

C. After they are routed to an outbound interface while queuing.

D. Before and after they are routed to an outbound interface.

E. Depends on the configuration of the interface

F. None of the above

A. Routing is mostly static.

B. Hardcoded IP addresses are used to support failover.

C. Inbound servers use the CSM or ACE as the default gateway.

D. VLANs between the access layer switches are used for FHRP protocols.

A. Routing is mostly static.

B. Hardcoded IP addresses are used to support failover.

C. Inbound servers use the CSM or ACE as the default gateway.

D. VLANs between the access layer switches are used for FHRP protocols.

in the range of 192.168.32.0 through 192.168.95.255. The route-map references an access list named test .What accurately accomplishes the goal of the route-map？（）

A. access-list test 192.168.32.0 0.0.63.255

B. access-list test permit 192.168.32.0 0.0.64.255

C. access-list test permit 192.168.32.0 0.0.63.255

D. access-list test permit 192.168.32.0 255.255.63.0

o all of the devices. The route is currently not in any of the routing tables. The PassGuide administrator determines that an access list is the cause of the problem. The administrator changes the access list to allow this route, but the route still doesnot appear in any of the routing tables. What should be done to propagate this route（）

A.Use the service-policy command to adjust the QOS policy to allow the route to propagate.

B.Clear the BGP session.

C.Use the release BGP routing command.

D.Change both the inbound and outbound policy related to this route.

E.None of the other alternatives apply

rver1 and Server2. All servers run Windows Server 2008 R2 and have Windows Firewall turned on. You need to ensure that you can use Event Viewer on Server2 to access the Application log on Server1. What should you do？（）

A. On Server2, create a new event subscription.

B. On Server2, modify the outbound firewall rules.

C. On Server1, modify the inbound firewall rules.

D. On Server1, modify the settings on the Application log.