How will router A choose a path to the 10.1.2.0/24 network when different routing protocols are configured （Choose three.)（）。

er. AS 65500 is running OSPF as its IGP. Whi ch of the following additions to the configuration is most likely to solve the problem？（）

A. RouterA(config)#ip cef

B. RouterA(config)#ip route 192.168.12.0 255.255.255.252 null 0

C. RouterA(config - router)#ebgp multihop 1

D. RouterA(config - router)#re distribute ospf 1

E. RouterA(config - router)#neighbor 192.168.14.253 next - hop - self

F. RouterA(config - router)#neighbor 192.168.14.253 local - as 65500

A. It is the size of the RSVP hello packet

B. It is how long it maintains RSVP neighbors

C. It is the length of time between RSVP hello packets

D. It is how long the router waits before declaring a router to be down

A.reset configuration

B.load factory-default

C.load override default

D.set default configuration

A.32

B.128

C.256

D.1000

t powered up？

A．A configured router prompts for a password

B．A configured router goes to the privileged mode prompt

C．An un configured router goes into the setup dialog

D．An un configured router goes to the enable mode prompt

A.A

B.B

C.C

D.D

A.1

B.2

C.4

D.8

A.1

B.2

C.3

D.4

E.5

F.6

A. reverse path of the RRO

B. least cost to the ingress router

C. shortest path to the egress router

D. reverse path of the path vector TLV

A. Router A must have a Level 2 adjacency with the Level 1/Level 2 router in area 49.0001.

B. The Level 1/Level 2 router in area 49.0001 sets the "attached" bit in the Level 1 link-state PDU (LSP) it floods into area 49.0001.

C. The Level 1/Level 2 router in area 49.0001 sets the "attached" bit in the Level 2 LSP it floods into area 49.0001.

D. The Level 1/Level 2 router in area 49.0001 advertises these prefixes into area 49.0001 using a Level 2 LSP it floods into the area.

A. A configured router prompts for a password

B. A configured router goes to the privileged mode prompt

C. An un configured router goes into the setup dialog

D. An un configured router goes to the enable mode prompt