A new Catalyst switch is connected to an existing switch using a crossover cable. As a result of this, what would the switch port link lights display？（）

A. The TESTKING VLAN must be created.

B. The desired ports must be added to the new TESTKING VLAN.

C. The TESTKING VLAN must be added to all of the domains.

D. The TESTKING VLAN must be named.

E. An IP address must be configured for the TESTKING VLAN.

F. None of the above. VLAN creations are automatic.

he company LAN and that the switch has stopped functioning. It has been replaced with a Cisco Catalyst 2950 series switch.What must be done to ensure that this new switch becomes the root bridge on the network？（）

A.One router is running RIPv1.

B.RIP neighbor is 224.0.0.9.

C.The network contains a loop.

D.Network 10.10.1.0 is reachable.

Which of the following need to be completed for the creation of this new VLAN？ (Select all that apply)

A. The EZONEXAM VLAN must be created.

B. The desired ports must be added to the new EZONEXAM VLAN.

C. The EZONEXAM VLAN must be added to all of the domains.

D. The EZONEXAM VLAN must be named.

E. An IP address must be configured for the EZONEXAM VLAN.

F. None of the above. VLAN creations are automatic.

ns on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP？（）

A. The switch name must match the workgroup name of the local network.

B. The switch must be configured with an IP address and default gateway.

C. The remote workstations must have access to the management VLAN of the switch.

D. CDP must be enabled on the switch so that it can be located by other devices on the network.

ther switch from a different vendor, which uses the IEEE standard for the trunking method.When setting the encapsulation type on the trunk, what should you configure on the Cisco switch？（）

A. Switch(config)# switchport trunk encapsulation isl

B. Switch(config)# switchport trunk encapsulation ietf

C. Switch(config-if)# switchport trunk encapsulation isl

D. Switch(config-if)# switchport trunk encapsulation ietf

E. Switch(config-if)# switchport trunk encapsulation dot1q

VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network.Which of the conditions below have to be met in order for this to occur？（）

A. The switch that will share the VLAN information must be in the VTP Server mode.

B. The switches must be in the same VTP domain.

C. The switch that will share the VLAN information must be configured as the root bridge.

D. The switches must be configured to use the same VTP version.

E. The switches must be configured to use the same STP version.

F. The switches must be configured to use the same type of ID tagging.

G. The switches must be connected over VLAN trunks.

VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network.

Which of the conditions below have to be met in order for this to occur？ (Choose all that apply).

A. The switch that will share the VLAN information must be in the VTP Server mode.

B. The switches must be in the same VTP domain.

C. The switch that will share the VLAN information must be configured as the root bridge.

D. The switches must be configured to use the same VTP version.

E. The switches must be configured to use the same STP version.

F. The switches must be configured to use the same type of ID tagging.

G. The switches must be connected over VLAN trunks.

#include

main()

{ char str[ ]=“The C program”,c;

int i;

for(i=2;(c=str[i])!=‘\0’;i++)

{ switch(c)

{ case ‘g’: ++i; break;

case ‘o’: continue;

default: printf(“%c”,c); continue;

}

printf(“*”);

}

printf(“\n”);

}

A.禁用DTP

B.删除当前通过端口Fa0/1中继的所有VLAN

C.关闭该接口，然后重新启用，使其恢复默认配置

D.在接口配置模式下输入switc hport mode access命令

（17 ）下列字符串中，不可以用作 C++ 标识符的是

A ） y_2006

B ） ____TEST__H

C ） Retum

D ） switch