An LPAR has hung during a reboot, reporting a 0552LED code. What does this signify？（）

A.In the HMC Properties, select the options to allow processor sharing when the partition is inactive and active.

B.In the LPAR Properties, select the options to allow processor sharing when the partition is inactive and active.

C.In the LPAR Profile Properties, select the options to allow processor sharing when the partition is inactive and active.

D.In the 595 Managed System Properties, select the options to allow processor sharing when partitions are inactive and active.

A.Run a system WPAR and deploy the application.

B.Create a new LPAR and deploy the application.

C.Create an application WPAR to deploy the application.

D.Create an LPAR hosted by a VIO server and deploy the application.

A.Dual power supplies.

B.Twice the amount of disk.

C.Two dual-port LHEA adapters.

D.Two dual-port fibre channel adapters.

A.The system is waiting for user input to define console type lft0.

B.The system is waiting for user input to define console type tty0.

C.The system is waiting for user input to define console type vty0.

D.The system is waiting for user input to define console type vsa0.

A.The adapter must be taken offline prior to the firmware update.

B.The system has not been rebooted since the adapter was added to the LPAR.

C.The adapter must be assigned to the service partition prior to updating the firmware.

D.The adapter must be dynamically removed from the LPAR prior to updating thefirmware.

A.is hanging

B.hangs

C.has hung

D.hung

—Is this raincoat yours？

—No, mine ______ there behind the door.

A) hangs B) has hung C) is hanging D) hung

A.hang

B.hung

C.hanging

D.hanged

A.Run ‘mkdev‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks.

B.Run ‘mkpath‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks.

C.Run ‘chpath‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks.

D.Run ‘cfgmgr‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks.