What are two default routing policies on Junos devices？（）

A.0.07%

B.2.6%

C.93.0%

D.The default correlation cannot be calculated with the information provided.

A. The default administrative distance has been changed.

B. IS - IS is not enabled.

C. Three physical interfaces are taking part in integrated IS - IS.

D. IS - IS is not redistributing any oth er routing protocols.

E. There are two neighboring routers sending IS - IS routing information.

F. Address summarization is configured.

A. Provides local hosts with a default gateway address

B. Allows remote management of the switch.

C. Allows the switch to respond to ARP requests between two hosts

D. Ensures that hosts on the same LAN can communicate with each other.

A.The fee will be larger if the default of A and of B are highly correlated.

B.The fee will be smaller if the default of A and of B are highly correlated.

C.The fee is independent of the correlation between the default of A and of B.

D.None of the above is correct.

A. incorrect distribute lists have been configured

B. missing ip classless command

C. CEF not enabled

D. no default metric configured for EIGRP

A. The next routing update can be expected in 35 seconds.

B. The IP address 10.10.10.6 is configured on S0/1.

C. The IP address 10.10.10.8 is configured on S0/1.

D. This route is using the default administrative distance.

E. The 10.10.10.8 network is two hops away from this router.

A.The default route should have a next hop address of 64.100.0.3.

B.Hosts on the LAN that is connected to FastEthernet 0/1 are using public IP addressing.

C.The address of the subnet segment with the WWW server will support seven more servers.

D.The addressing scheme allows users on the Internet to access the WWW server.

E.Hosts on the LAN that is connected to FastEthernet 0/1 will not be able to access the Internet without address translation.

A. The default route should have a next hop address of 64.100.0.3.

B. Hosts on the LAN that is connected to FastEthernet 0/1 are using public IP addressing.

C. The address of the subnet segment with the WWW server will support seven more servers.

D. The addressing scheme allows users on the Internet to access the WWW server.

E. Hosts on the LAN that is connected to FastEthernet 0/1 will not be able to access the Internet without address translation.

e purpose of assigning an IP address to a switch？

A．To provide local hosts with a default gateway address

B．To allow remote management of the switch.

C．To allow the switch to respond to ARP requests between two hosts

D．To ensure that hosts on the same LAN can communicate with each other.

E．None of the above

ntly the AS 100 eBGP links have an average outbound load of 65% and 20% respectively. On further investigation, traffic from 10.10.24.0 accounts for 45%, and 10.10.25.0 and 10.10.32.0 accounts for 20% each of the outbound load. The customer wants to spread the load between the two eBGP links more evenly. The BGP attributes are currently set at their default values. If you are located at AS 100 and want to influence how AS 100 sends traffic to AS 200, what BGP attribute could you configure to cause AS 100 outbound traffic to load the eB GP links more evenly？ （）

A. On router A, set the default local - preference to 50.

B. On router B, set the default metric to 150.

C. On router B, configure a route map for 10.10.25.0/24 with a local preference of 150 linked to neighbor 192.168.30.2.

D. On router B, set the default local -preference to 150.