What are two valid Cluster load balancing methods？ （）（Choose two.)

A.CLI

B.J-Web

C.JUNOScope

D.PCMCIA flash card

A. discard

B. next policy

C. accept

D. ignore

A. OSPF area ID

B. prefix list

C. port

D. time-to-live (TTL)

A. via the accept x.x/y command

B. via TCP reachable physical interface addresses

C. via remote loopbacks with the local-address command

D. via UDP with the neighbor x.x.x.x command at the group level

A. telnet access does not require a password

B. nat

C. no broadcast

D. chanage of destination address in the ipv6 header

E. chanage of source address in the ipv6 header

F. autoconfiguration

A. Kill a running process on the endpoint, based on executable name and MD5 checksum.

B. Delete a file on the endpoint‘s file system.

C. Download and run a remediation executable from the local software distribution server.

D. Alter registry entries to prevent future execution of an executable, based on executable name and full path.

A.Router1 has specific boot system command that instruct it to load IOS from TFTP server.

B.Router1 is acting as a TFTP server for other routers.

C.Router1 cannot locate a valid IOS image in flash memory.

D.Router1 defaulted to ROMMON mode and loaded the IOS image from a TFTP server.

E.Cisco routers will first attempt to load a image from TFTP for management purposes.

A.The reinspection will be made between the fourteenth and sixteenth months

B.The inspector shall examine all accessible parts of the vessels’s hull

C.The inspector shall examine the vessel’s machinery as well as equipment

D.The scope of the reinspection shall be the same as for the inspection for certification，but in less detai

A. The destination host sends a request to the source for retransmission.

B. The jam signal indicates that the collision has been cleared.

C. The hosts will attempt to resume transmission after a time delay has expired.

D. An electrical pulse indicates that the collision has cleared.

E. The router on the segment will signal that the collision has cleared.

F. The hosts will do nothing, as the higher layers are responsible for data error correction and re-transmission.