题目
路由器的S0端口连接____.
A.广域网
B.以太网
C.集线器
D.交换机
第2题
● 路由器的S0 端口连接 (13) 。
(13)A. 广域网 B. 以太网 C. 集线器 D. 交换机
第3题
●以太网交换机的Console端口连接 (36) ,Ethernet端口连接 (37) 。
(36)A.广域网
B.以太网卡
C.计算机串口
D.路由器S0口
(37)A.广域网
B.以太网卡
C.计算机串口
D.路由器S0口
第6题
配置交换机时,以太网交换机的Console端口连接()。
A.广域网B.以太网卡C.计算机串口D.路由器SO口
第7题
阅读下列广域网路由基本技术的应用,分析路由器的配置命令,将应填入(n)处的内容写在对应栏内。
实例:通过Cisco2501 连接A局域网与B局域网,如图5-1所示。
假设实验条件如下:
A网:202.96.199.0~0202.96.199.255
B网:202.97.76.0~202.97.76.31
DNS Server:202.96.199.2(主),202.96.199.3(备)
所属域:xxx.com
广域网互联:需要一个包含4个IP地址(2个可用IP)的子网,定为:202.98.0.0~ 202.98.0.3,其中202.98.0.1给A网,202.98.0.2给B网,互联专线速率:128kbps。具体网络参数分配表如下:
首先进入路由器:将计算机串行口连接到路由器的Console 口,使用Netterm 或者超级终端之类的软件登录。
Router>en
passwd:******(输入超级口令)
全局配置:(A、B网相同)
Router config terminal(切换到配置状态)
Router (config)enable secret my-root-password(定义超级口令)
Router(config)ip host Router-A(定义路由器名,B网为Router-B)
Router(config)ip domain-name (1)
Router(config)nameserver 202.96.199.2(定义主域名服务器)
Router(config)nameserver202.96.199.3(定义备域名服务器)
Router(config)ip classless
Router(config)line (2)
(定义5个telnet虚终端,即可以同时有5个人登录本路由器)
Router(con6g—1ine)password my-telnet-password(定义telnet口令)
Router(conhZ-line)exit
Router(config)exit
地址和路由配置:
/***** A网路由器 ******/
Router-Aconfig terminal(切换到配置状态)
Router-A(config)interface e0(配置Ethernet 0 口)
Router-A(config-if)gdescliption the LAN port link to my local network(端口说明)
Router-A(comfig-if)ip address (3)
Router-A(config-if)noshutdown(激活端口)
Router-A(config-if)exit
Router-A(config)interface s0(配置 Serial 0 口)
Router-A(config-if)descdption the WAN port link to Router-B(端口说明)
Router-A(config-if)ip add 202.98.0.1 255.255.255.252(定义互联广域网p地址)
Router-A(config-if)bandwidth 128(定义端口速率,单位:kbps)
Router-A(config-if)no shutdown(激活端口)
Router-A(config-if)exit
Router-A(config)ip route (4)
Router-A(config)exit
Router-Awr m(保存配置)
/***** B网路由器 ******/
Router-Bconfig terminal
Router-B(config)interface e0
Router-B(config-if)description the LAN port link to my local network(端口说明)
Router-B(config-if)ip add 202.97.76.1 255.255.255.224
(定义以太网IP地址,子网掩码表示为拥有32个地址的子网)
Router-B(config-if)no shutdown
Router-B(config-if)exit
Router-B(config)interface s0
Router-B(config-if)escdption the WAN port link to Router-A(端口说明)
Router-B(config-if)ip add 202.98.0.2255.255.255.252
Router-B(config-if)bandwid 128
Router-B(config-if)no shutdown
Router-B(config-if)exit
Router-B(config)ip route (5)
Router-B(config)exit
Router-Bwr m(保存配置)
配置完成。
第8题
阅读下列广域网路由基本技术的应用,分析路由器的配置命令,将应填入(n)处的内容写在答题纸的对应栏内。
实例:通过Cisco 2501连接A局域网与B局域网,如图2所示。
假设实验条件如下:
A网:202.96.199.0~202.96.199.255
B网:202.97.76.0~202.97.76.31
DNS Server:202.96.199.2(主),202.96.199.3(备)
所属域:xxx.com
广域网互联:需要一个包含4个IP地址(2个可用IP)的子网,定为:202.98.0.0~202.98.0.3,其中202.98.0.1给A网,202.98.0.2给B网,互联专线速率:128kbps。
具体网络参数分配表见 表2:
项 目
A 网
B 网
网络号
202.96.199.0
202.97.76.0
子网掩码
255.255.255.0
255.255.255.224
所属域
xxx.com
yyy.com
以太网地址
202.96.199.1
202.97.76.1
互联地址
202.98.0.1
202.98.0.2
专线速率
128kbps
128kbps
域名服务器
主:202.96.199.2
主:202.96.199.2
备:202.96.199.3
备:202.96.199.3
首先进入路由器:将计算机串行口连接到路由器的Console口,使用Netterm或者超级终端之类的软件登录。
Router>en
passwd:******(输入超级口令)
全局配置:(A、B网相同)
Routerconfig terminal(切换到配置状态)
Router(config)enable secret myrootpassword(定义超级口令)
Router(config)ip host RouterA(定义路由器名,B网为RouterB)
Router(config)ip domain-name (1)
Router(config)nameserver 202.96.199.2(定义主域名服务器)
Router(config)nameserver 202.96.199.3(定义备域名服务器)
Router(config)ip classless
Router(config)line (2)
(定义5个telnet虚终端,即可以同时有5个人登录本路由器)
Router(config-line)password my-telnet-password(定义telnet口令)
Router(config·line)exit
Router(config)exit
地址和路由配置:
/******A网路由器******/
Router-Aconfig terminal(切换到配置状态)
Router-A(config)interface e0(配置Ethernet 0 口)
Router-A(configif)description the LAN port link to my local network(端口说明)
Router-A(configif)ip address (3)
Router-A(configif)no shutdown(激活端口)
Router-A(configif)exit
Router-A(config)Interfa s0(配置Serial0 口)
Router-A(configif)description the WAN port link to Router-B(端口说明)
Router-A(configif)ip add 202.98.0.1 255.255.255.252(定义互联广域网IP地址)
Router-A(configif)bandwidth 128(定义端口速率,单位:kbps)
Router-A(configif)no shutdown(激活端口)
Router-A(config-if)exit
Router-A(config)ip route (4)
Router-A(contig)exit
Router-Awr m(保存配置)
/****** B网路由器 *******/
Router-Bconfig terminal
Router-B(config)interface e0
Router-B(configif)descripfion the LAN port link to my local network(端口说明)
Router-B(config-if)ip add 202.97.76.1 255.255.255.224
(定义以太网IP地址,子网掩码表示为拥有32个地址的子网)
Router-B(config-if)no shutdown
Router-B(config-if)exit
Router-B(config)interface s0
Router-B(configif)description the WAN port link to Router-A(端口说明)
Router-B(config-if)ip add 202.98.0.2 255.255.255.252
Router-B(config-if)bandwidth 128
Router-B(config-if)no shutdown
Router-B(config-if)exit
Router-B(config)ip route (5)
Router-B(config)exit
Router-Bwr m(保存配置)
配置完成。
第10题
路由器通过光纤连接广域网的是______。
A.SFP端口
B.同步串行口
C.Console端口
D.AUX端口
为了保护您的账号安全,请在“赏学吧”公众号进行验证,点击“官网服务”-“账号验证”后输入验证码“”完成验证,验证成功后方可继续查看答案!